Design Cockpit
Application
Environment
Material not specified.
material will be included in the search. materials will be included in the search
Calculation Parameters
Ring inside diameter (d1)
Tolerance
Min.: / Max.:
Tolerance
/
±
Ring cross section (d2)
Tolerance
Min.: / Max.:
Tolerance
/
±
Shaft diameter (d9)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Bore diameter (d4)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Groove inside diameter (d3)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Groove width (b1)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Shaft diameter (d5)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Bore diameter (d10)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Groove outside diameter (d6)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Groove width (b1)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Gap width (g)
Min.: / Max.:
Tolerance
/
Housing height (h)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Groove width (b4)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Groove inside diameter (d8)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Inner groove radius (r1)
Tolerance
Min.: / Max.:
Tolerance
/
±
Min. tolerance
Max. tolerance
Enter Tolerance
Chamfer angle
Construction
| Min | Target | Mean | Target | Max | Target | |||
|---|---|---|---|---|---|---|---|---|
|
|
||||||||
| Stretching | ||||||||
| Holding ratio | ||||||||
| Centric compression | ||||||||
| Groove filling ratio | ||||||||
*Target value according to ISO 3601-2
**Target value according to company experience
Suitability of the material regarding gap extrusion is possible in the material wizard.
**Target value according to company experience
Suitability of the material regarding gap extrusion is possible in the material wizard.
|
Central gap width Gap width |
Axial chamfer angle |
||||
|---|---|---|---|---|---|
|
|
|||||
| Min | |||||
| Mean | |||||
| Max | |||||
|
Ring volume |
Ring surface |
||||
|---|---|---|---|---|---|
|
|
|||||
| Min | ³ | ² | |||
| Mean | ³ | ² | |||
| Max | ³ | ² | |||
| Lead-in chamfer | Side surface | Static pressure mating surface | Dynamic pressure mating surface | ||
|---|---|---|---|---|---|
|
|
|||||
| Ra | |||||
| Rz | |||||
Fitting catalog rings
Back to construction view|
Article No.
|
Availability
|
Material
|
d1
() |
d2
() |
Stretching
(%) |
Holding ratio
(%) |
Centric compression
(%) |
Groove filling ratio)
(%) |
|
|
|---|---|---|---|---|---|---|---|---|---|---|
| On Stock | On Request |
|
|
min.
Ø
max.
|
min.
Ø
max.
|
min.
Ø
max.
|
min.
Ø
max.
|
|
d1
() |
d2
() |
Stretching
(%) |
Holding ratio
(%) |
Centric compression
(%) |
Groove filling ratio
(%) |
|---|
|
|
|||||
|
min.
Ø
max.
|
min.
Ø
max.
|
min.
Ø
max.
|
min.
Ø
max.
|
||
catalogue rings only for industrial applications (non automotive)
Email
Name
Company
Design Remarks
PDF language
2D
3D
Product Details
The tolerances of the O-Ring dimensions are determined according to DIN ISO 3601-1 Class B.
Please check the correctness of the installation space dimensions and other data used in this calculation. The function and assembly of the O-Ring should be checked and confirmed by the user through practical tests in the overall system. Catalogue parts must not be used for validation in automotive and aerospace applications. The O-Ring Configurator Report is merely a product recommendation and should be discussed with a sales engineer from Freudenberg Sealing Technologies.
Construction
Application:
Sealing compression:
| Min | Target | Mean | Target | Max | Target | |||
|---|---|---|---|---|---|---|---|---|
| Stretching | % | |||||||
| Holding ratio | % | |||||||
| Centric compression | % | %* | % | % | ||||
| Groove filling ratio | % | % |
*Target value according to ISO 3601-2
**Target value according to company experience
Suitability of the material regarding gap extrusion is possible in the material wizard.
**Target value according to company experience
Suitability of the material regarding gap extrusion is possible in the material wizard.
|
Central gap width Gap width |
Axial chamfer angle |
|
|---|---|---|
| Min | ||
| Mean | ||
| Max |
|
Ring volume |
Ring surface |
|
|---|---|---|
| Min | ³ | ² |
| Mean | ³ | ² |
| Max | ³ | ² |
*Target value according to ISO 3601-2
**Target value according to company experience
**Target value according to company experience
| Lead-in chamfer | Side surface | Static pressure mating surface | Dynamic pressure mating surface | |
|---|---|---|---|---|
| Ra | ||||
| Rz |
*Target value according to ISO 3601-2
**Target value according to company experience
**Target value according to company experience
Email
Name
Company
Design Remarks
PDF language